   HTML>

                                   fuzznuc



Wiki

   The master copies of EMBOSS documentation are available at
   http://emboss.open-bio.org/wiki/Appdocs on the EMBOSS Wiki.

   Please help by correcting and extending the Wiki pages.

Function

   Search for patterns in nucleotide sequences

Description

   fuzznuc searches for a specified PROSITE-style pattern in nucleotide
   sequences. Such patterns are specifications of a (typically short)
   length of sequence to be found. They can specify a search for an exact
   sequence or they can allow various ambiguities, matches to variable
   lengths of sequence and repeated subsections of the sequence. One or
   more nucleotide sequences are read from file. The output is a standard
   EMBOSS report file that includes data such as location and score of any
   matches.

Algorithm

   fuzznuc intelligently selects the optimum searching algorithm to use,
   depending on the complexity of the search pattern specified.

Usage

   Here is a sample session with fuzznuc


% fuzznuc
Search for patterns in nucleotide sequences
Input nucleotide sequence(s): tembl:L46634
Search pattern: AAGCTT
Output report [l46634.fuzznuc]:


   Go to the input files for this example
   Go to the output files for this example

   Example 2


% fuzznuc
Search for patterns in nucleotide sequences
Input nucleotide sequence(s): tembl:L46634
Search pattern: @nucseq.pat
Output report [l46634.fuzznuc]:


   Go to the input files for this example
   Go to the output files for this example

   Example 3


% fuzznuc -pname test
Search for patterns in nucleotide sequences
Input nucleotide sequence(s): tembl:L46634
Search pattern: @nucsimple.pat
Output report [l46634.fuzznuc]:


   Go to the input files for this example
   Go to the output files for this example

   Example 4


% fuzznuc
Search for patterns in nucleotide sequences
Input nucleotide sequence(s): tembl:L46634
Search pattern: @nuc.pat
Output report [l46634.fuzznuc]:


   Go to the input files for this example
   Go to the output files for this example

Command line arguments

Search for patterns in nucleotide sequences
Version: EMBOSS:6.4.0.0

   Standard (Mandatory) qualifiers:
  [-sequence]          seqall     Nucleotide sequence(s) filename and optional
                                  format, or reference (input USA)
   -pattern            pattern    The standard IUPAC one-letter codes for the
                                  nucleotides are used.
                                  The symbol 'n' is used for a position where
                                  any nucleotide is accepted.
                                  Ambiguities are indicated by listing the
                                  acceptable nucleotides for a given position,
                                  between square parentheses '[ ]'. For
                                  example: [ACG] stands for A or C or G.
                                  Ambiguities are also indicated by listing
                                  between a pair of curly brackets '{ }' the
                                  nucleotides that are not accepted at a given
                                  position. For example: {AG} stands for any
                                  nucleotides except A and G.
                                  Each element in a pattern is separated from
                                  its neighbor by a '-'. (Optional in
                                  fuzznuc).
                                  Repetition of an element of the pattern can
                                  be indicated by following that element with
                                  a numerical value or a numerical range
                                  between parenthesis. Examples: N(3)
                                  corresponds to N-N-N, N(2,4) corresponds to
                                  N-N or N-N-N or N-N-N-N.
                                  When a pattern is restricted to either the
                                  5' or 3' end of a sequence, that pattern
                                  either starts with a '<' symbol or
                                  respectively ends with a '>' symbol.
                                  A period ends the pattern. (Optional in
                                  fuzznuc).
                                  For example, [CG](5)TG{A}N(1,5)C
  [-outfile]           report     [*.fuzznuc] Output report file name (default
                                  -rformat seqtable)

   Additional (Optional) qualifiers: (none)
   Advanced (Unprompted) qualifiers:
   -complement         boolean    [N] Search complementary strand

   Associated qualifiers:

   "-sequence" associated qualifiers
   -sbegin1            integer    Start of each sequence to be used
   -send1              integer    End of each sequence to be used
   -sreverse1          boolean    Reverse (if DNA)
   -sask1              boolean    Ask for begin/end/reverse
   -snucleotide1       boolean    Sequence is nucleotide
   -sprotein1          boolean    Sequence is protein
   -slower1            boolean    Make lower case
   -supper1            boolean    Make upper case
   -sformat1           string     Input sequence format
   -sdbname1           string     Database name
   -sid1               string     Entryname
   -ufo1               string     UFO features
   -fformat1           string     Features format
   -fopenfile1         string     Features file name

   "-pattern" associated qualifiers
   -pformat            string     File format
   -pmismatch          integer    Pattern mismatch
   -pname              string     Pattern base name

   "-outfile" associated qualifiers
   -rformat2           string     Report format
   -rname2             string     Base file name
   -rextension2        string     File name extension
   -rdirectory2        string     Output directory
   -raccshow2          boolean    Show accession number in the report
   -rdesshow2          boolean    Show description in the report
   -rscoreshow2        boolean    Show the score in the report
   -rstrandshow2       boolean    Show the nucleotide strand in the report
   -rusashow2          boolean    Show the full USA in the report
   -rmaxall2           integer    Maximum total hits to report
   -rmaxseq2           integer    Maximum hits to report for one sequence

   General qualifiers:
   -auto               boolean    Turn off prompts
   -stdout             boolean    Write first file to standard output
   -filter             boolean    Read first file from standard input, write
                                  first file to standard output
   -options            boolean    Prompt for standard and additional values
   -debug              boolean    Write debug output to program.dbg
   -verbose            boolean    Report some/full command line options
   -help               boolean    Report command line options and exit. More
                                  information on associated and general
                                  qualifiers can be found with -help -verbose
   -warning            boolean    Report warnings
   -error              boolean    Report errors
   -fatal              boolean    Report fatal errors
   -die                boolean    Report dying program messages
   -version            boolean    Report version number and exit


Input file format

   fuzznuc reads in one or more nucleotide sequences.

   The input is a standard EMBOSS sequence query (also known as a 'USA').

   Major sequence database sources defined as standard in EMBOSS
   installations include srs:embl, srs:uniprot and ensembl

   Data can also be read from sequence output in any supported format
   written by an EMBOSS or third-party application.

   The input format can be specified by using the command-line qualifier
   -sformat xxx, where 'xxx' is replaced by the name of the required
   format. The available format names are: gff (gff3), gff2, embl (em),
   genbank (gb, refseq), ddbj, refseqp, pir (nbrf), swissprot (swiss, sw),
   dasgff and debug.

   See: http://emboss.sf.net/docs/themes/SequenceFormats.html for further
   information on sequence formats.

  Input files for usage example

   'tembl:L46634' is a sequence entry in the example nucleic acid database
   'tembl'

  Database entry: tembl:L46634

ID   L46634; SV 1; linear; genomic DNA; STD; VRL; 1272 BP.
XX
AC   L46634; L46689;
XX
DT   06-NOV-1995 (Rel. 45, Created)
DT   04-MAR-2000 (Rel. 63, Last updated, Version 3)
XX
DE   Human herpesvirus 7 (clone ED132'1.2) telomeric repeat region.
XX
KW   telomeric repeat.
XX
OS   Human herpesvirus 7
OC   Viruses; dsDNA viruses, no RNA stage; Herpesvirales; Herpesviridae;
OC   Betaherpesvirinae; Roseolovirus.
XX
RN   [1]
RP   1-1272
RX   PUBMED; 7494318.
RA   Secchiero P., Nicholas J., Deng H., Xiaopeng T., van Loon N., Ruvolo V.R.,
RA   Berneman Z.N., Reitz M.S.Jr., Dewhurst S.;
RT   "Identification of human telomeric repeat motifs at the genome termini of
RT   human herpesvirus 7: structural analysis and heterogeneity";
RL   J. Virol. 69(12):8041-8045(1995).
XX
FH   Key             Location/Qualifiers
FH
FT   source          1..1272
FT                   /organism="Human herpesvirus 7"
FT                   /strain="JI"
FT                   /mol_type="genomic DNA"
FT                   /clone="ED132'1.2"
FT                   /db_xref="taxon:10372"
FT   repeat_region   207..928
FT                   /note="long and complex repeat region composed of various
FT                   direct repeats, including TAACCC (TRS), degenerate copies
FT                   of TRS motifs and a 14-bp repeat, TAGGGCTGCGGCCC"
FT   misc_signal     938..998
FT                   /note="pac2 motif"
FT   misc_feature    1009
FT                   /note="right genome terminus (...ACA)"
XX
SQ   Sequence 1272 BP; 346 A; 455 C; 222 G; 249 T; 0 other;
     aagcttaaac tgaggtcaca cacgacttta attacggcaa cgcaacagct gtaagctgca        60
     ggaaagatac gatcgtaagc aaatgtagtc ctacaatcaa gcgaggttgt agacgttacc       120
     tacaatgaac tacacctcta agcataacct gtcgggcaca gtgagacacg cagccgtaaa       180
     ttcaaaactc aacccaaacc gaagtctaag tctcacccta atcgtaacag taaccctaca       240
     actctaatcc tagtccgtaa ccgtaacccc aatcctagcc cttagcccta accctagccc       300
     taaccctagc tctaacctta gctctaactc tgaccctagg cctaacccta agcctaaccc       360
     taaccgtagc tctaagttta accctaaccc taaccctaac catgaccctg accctaaccc       420
     tagggctgcg gccctaaccc tagccctaac cctaacccta atcctaatcc tagccctaac       480
     cctagggctg cggccctaac cctagcccta accctaaccc taaccctagg gctgcggccc       540
     taaccctaac cctagggctg cggcccgaac cctaacccta accctaaccc taaccctagg       600
     gctgcggccc taaccctaac cctagggctg cggccctaac cctaacccta gggctgcggc       660
     ccgaacccta accctaaccc taaccctagg gctgcggccc taaccctaac cctagggctg       720
     cggccctaac cctaacccta actctagggc tgcggcccta accctaaccc taaccctaac       780
     cctagggctg cggcccgaac cctagcccta accctaaccc tgaccctgac cctaacccta       840
     accctaaccc taaccctaac cctaacccta accctaaccc taaccctaac cctaacccta       900
     accctaaccc taaccctaac cctaaccccg cccccactgg cagccaatgt cttgtaatgc       960
     cttcaaggca ctttttctgc gagccgcgcg cagcactcag tgaaaaacaa gtttgtgcac      1020
     gagaaagacg ctgccaaacc gcagctgcag catgaaggct gagtgcacaa ttttggcttt      1080
     agtcccataa aggcgcggct tcccgtagag tagaaaaccg cagcgcggcg cacagagcga      1140
     aggcagcggc tttcagactg tttgccaagc gcagtctgca tcttaccaat gatgatcgca      1200
     agcaagaaaa atgttctttc ttagcatatg cgtggttaat cctgttgtgg tcatcactaa      1260
     gttttcaagc tt                                                          1272
//

  Input files for usage example 2

  File: nucseq.pat

>targetseq
cg(2)c(3)taac
cctagc(3)ta

  Input files for usage example 3

  File: nucsimple.pat

cg(2)c(3)taac
cctagc(3)ta

  Input files for usage example 4

  File: nuc.pat

>pat1
cggccctaaccctagcccta
>pat2 <mismatch=1>
cg(2)c(3)taac
cctagc(3)ta
>pat3
cggc(2,4)taac(2,5)


  Pattern specification

   Patterns for fuzznuc are based on the format of pattern used in the
   PROSITE database, with the difference that the terminating dot '.' and
   the hyphens, '-', between the characters are optional.

   The PROSITE pattern definition from the PROSITE documentation (amended
   to refer to nucleic acid sequences, not proteins) follows.
     * The standard IUPAC one-letter codes for the nucleotides are used.
     * The symbol `n' is used for a position where any nucleotide is
       accepted.
     * Ambiguities are indicated by listing the acceptable nucleotides for
       a given position, between square parentheses `[ ]'. For example:
       [ACG] stands for A or C or G.
     * Ambiguities are also indicated by listing between a pair of curly
       brackets `{ }' the nucleotides that are not accepted at a given
       position. For example: {AG} stands for any nucleotides except A and
       G.
     * Each element in a pattern is separated from its neighbor by a `-'.
       (Optional in fuzznuc).
     * Repetition of an element of the pattern can be indicated by
       following that element with a numerical value or a numerical range
       between parenthesis. Examples: N(3) corresponds to N-N-N, N(2,4)
       corresponds to N-N or N-N-N or N-N-N-N.
     * When a pattern is restricted to either the 5' or 3' end of a
       sequence, that pattern either starts with a `<' symbol or
       respectively ends with a `>' symbol.
     * A period ends the pattern. (Optional in fuzznuc).
     * All other characters, including spaces are not allowed.

   For example, in the EMBL entry J01636 you can look for the pattern:

[CG](5)TG{A}N(1,5)C


   This searches for "C or G" 5 times, followed by T and G, then anything
   except A, then any base (1 to 5 times) before a C.

   You can use ambiguity codes for nucleic acid searches but not within []
   or {} as they expand to bracketed counterparts. For example, "s" is
   expanded to "[GC]" therefore [S] would be expanded to [[GC]] which is
   illegal.

   Note the use of X is reserved for proteins. You must use N for nucleic
   acids to refer to any base.

   The search is case-independent, so 'AAA' matches 'aaa'.

Output file format

   The output is a standard EMBOSS report file.

   The results can be output in one of several styles by using the
   command-line qualifier -rformat xxx, where 'xxx' is replaced by the
   name of the required format. The available format names are: embl,
   genbank, gff, pir, swiss, dasgff, debug, listfile, dbmotif, diffseq,
   draw, restrict, excel, feattable, motif, nametable, regions, seqtable,
   simple, srs, table, tagseq.

   See: http://emboss.sf.net/docs/themes/ReportFormats.html for further
   information on report formats.

   By default fuzznuc writes a 'seqtable' report file.

  Output files for usage example

  File: l46634.fuzznuc

########################################
# Program: fuzznuc
# Rundate: Fri 15 Jul 2011 12:00:00
# Commandline: fuzznuc
#    -sequence tembl:L46634
#    -pattern AAGCTT
# Report_format: seqtable
# Report_file: l46634.fuzznuc
########################################

#=======================================
#
# Sequence: L46634     from: 1   to: 1272
# HitCount: 2
#
# Pattern_name Mismatch Pattern
# pattern             0 AAGCTT
#
# Complement: No
#
#=======================================

  Start     End  Strand Pattern         Mismatch Sequence
      1       6       + pattern: AAGCTT        . aagctt
   1267    1272       + pattern: AAGCTT        . aagctt

#---------------------------------------
#---------------------------------------

#---------------------------------------
# Total_sequences: 1
# Total_length: 1272
# Reported_sequences: 1
# Reported_hitcount: 2
#---------------------------------------

  Output files for usage example 2

  File: l46634.fuzznuc

########################################
# Program: fuzznuc
# Rundate: Fri 15 Jul 2011 12:00:00
# Commandline: fuzznuc
#    -sequence tembl:L46634
#    -pattern @../../data/nucseq.pat
# Report_format: seqtable
# Report_file: l46634.fuzznuc
########################################

#=======================================
#
# Sequence: L46634     from: 1   to: 1272
# HitCount: 2
#
# Pattern_name Mismatch Pattern
# targetseq           0 cg(2)c(3)taaccctagc(3)ta
#
# Complement: No
#
#=======================================

  Start     End  Strand Pattern                             Mismatch Sequence
    429     448       + targetseq: cg(2)c(3)taaccctagc(3)ta        . cggccctaacc
ctagcccta
    491     510       + targetseq: cg(2)c(3)taaccctagc(3)ta        . cggccctaacc
ctagcccta

#---------------------------------------
#---------------------------------------

#---------------------------------------
# Total_sequences: 1
# Total_length: 1272
# Reported_sequences: 1
# Reported_hitcount: 2
#---------------------------------------

  Output files for usage example 3

  File: l46634.fuzznuc

########################################
# Program: fuzznuc
# Rundate: Fri 15 Jul 2011 12:00:00
# Commandline: fuzznuc
#    -pname test
#    -sequence tembl:L46634
#    -pattern @../../data/nucsimple.pat
# Report_format: seqtable
# Report_file: l46634.fuzznuc
########################################

#=======================================
#
# Sequence: L46634     from: 1   to: 1272
# HitCount: 13
#
# Pattern_name Mismatch Pattern
# test1               0 cg(2)c(3)taac
# test2               0 cctagc(3)ta
#
# Complement: No
#
#=======================================

  Start     End  Strand Pattern              Mismatch Sequence
    429     438       + test1: cg(2)c(3)taac        . cggccctaac
    491     500       + test1: cg(2)c(3)taac        . cggccctaac
    535     544       + test1: cg(2)c(3)taac        . cggccctaac
    605     614       + test1: cg(2)c(3)taac        . cggccctaac
    631     640       + test1: cg(2)c(3)taac        . cggccctaac
    695     704       + test1: cg(2)c(3)taac        . cggccctaac
    721     730       + test1: cg(2)c(3)taac        . cggccctaac
    753     762       + test1: cg(2)c(3)taac        . cggccctaac
    293     302       + test2: cctagc(3)ta          . cctagcccta
    439     448       + test2: cctagc(3)ta          . cctagcccta
    469     478       + test2: cctagc(3)ta          . cctagcccta
    501     510       + test2: cctagc(3)ta          . cctagcccta
    801     810       + test2: cctagc(3)ta          . cctagcccta

#---------------------------------------
#---------------------------------------

#---------------------------------------
# Total_sequences: 1
# Total_length: 1272
# Reported_sequences: 1
# Reported_hitcount: 13
#---------------------------------------

  Output files for usage example 4

  File: l46634.fuzznuc

########################################
# Program: fuzznuc
# Rundate: Fri 15 Jul 2011 12:00:00
# Commandline: fuzznuc
#    -sequence tembl:L46634
#    -pattern @../../data/nuc.pat
# Report_format: seqtable
# Report_file: l46634.fuzznuc
########################################

#=======================================
#
# Sequence: L46634     from: 1   to: 1272
# HitCount: 19
#
# Pattern_name Mismatch Pattern
# pat1                0 cggccctaaccctagcccta
# pat2                1 cg(2)c(3)taaccctagc(3)ta
# pat3                0 cggc(2,4)taac(2,5)
#
# Complement: No
#
#=======================================

  Start     End  Strand Pattern                        Mismatch Sequence
    429     448       + pat1: cggccctaaccctagcccta            . cggccctaaccctagc
ccta
    491     510       + pat1: cggccctaaccctagcccta            . cggccctaaccctagc
ccta
    429     448       + pat2: cg(2)c(3)taaccctagc(3)ta        . cggccctaaccctagc
ccta
    491     510       + pat2: cg(2)c(3)taaccctagc(3)ta        . cggccctaaccctagc
ccta
    535     554       + pat2: cg(2)c(3)taaccctagc(3)ta        1 cggccctaaccctaac
ccta
    605     624       + pat2: cg(2)c(3)taaccctagc(3)ta        1 cggccctaaccctaac
ccta
    631     650       + pat2: cg(2)c(3)taaccctagc(3)ta        1 cggccctaaccctaac
ccta
    695     714       + pat2: cg(2)c(3)taaccctagc(3)ta        1 cggccctaaccctaac
ccta
    721     740       + pat2: cg(2)c(3)taaccctagc(3)ta        1 cggccctaaccctaac
ccta
    753     772       + pat2: cg(2)c(3)taaccctagc(3)ta        1 cggccctaaccctaac
ccta
    791     810       + pat2: cg(2)c(3)taaccctagc(3)ta        1 cggcccgaaccctagc
ccta
    753     764       + pat3: cggc(2,4)taac(2,5)              . cggccctaaccc
    721     732       + pat3: cggc(2,4)taac(2,5)              . cggccctaaccc
    695     706       + pat3: cggc(2,4)taac(2,5)              . cggccctaaccc
    631     642       + pat3: cggc(2,4)taac(2,5)              . cggccctaaccc
    605     616       + pat3: cggc(2,4)taac(2,5)              . cggccctaaccc
    535     546       + pat3: cggc(2,4)taac(2,5)              . cggccctaaccc
    491     502       + pat3: cggc(2,4)taac(2,5)              . cggccctaaccc
    429     440       + pat3: cggc(2,4)taac(2,5)              . cggccctaaccc

#---------------------------------------
#---------------------------------------

#---------------------------------------
# Total_sequences: 1
# Total_length: 1272
# Reported_sequences: 1
# Reported_hitcount: 19
#---------------------------------------

Data files

   None.

Notes

   None.

References

   None.

Warnings

   None.

Diagnostic Error Messages

   None.

Exit status

   It always exits with a status of 0.

Known bugs

   None.

See also

                    Program name                      Description
                    dreg         Regular expression search of nucleotide sequence(s)
                    fuzztran     Search for patterns in protein sequences (translated)

Author(s)

   Alan             Bleasby
   European         Bioinformatics Institute, Wellcome Trust Genome Campus,
   Hinxton,         Cambridge CB10 1SD, UK

                    Please report all bugs to the EMBOSS bug team
                    (emboss-bug (c) emboss.open-bio.org) not to the original author.

History

                    Written (2000) - Alan Bleasby
                    '-usa' added (13 March 2001) - Gary Williams

Target users

                    This program is intended to be used by everyone and everything, from
                    naive users to embedded scripts.

Comments

                    None
